Condor Engineering CONCEI-520 36" Cable | with Twisted Pairs | Transitions from the card end (P2) connector on the CEI-520/520A | or CEI-830 to Pigtail Ends | This cable is for ARINC signals only
Condor Engineering CONCEI-620 36" Transition Cable (with twisted pairs) | Transitions from a card end connector (P1 or P2) on the CEI-620 or CEI-820 to a 50 pin D-sub male connector
Condor Engeineering CONCEI-710 Transition Cable (with twisted pairs) | 12" Length | transitions from a card edge connector (P2 or P3) on the CEI-710 to a 15 pin D-sub female connector.
Condor Engineering CONCEI-715 Transition Cable. Twisted pairs) | 30" Length | PCMCIA | Transitions from the card edge connector on the CEI-715 to a 37 pin D-sub with socket/female contacts
Condor Engineering CONCEI520-P10 10 foot cable (with twisted pairs) transitions from the card end (P2) connector on the CEI-520/520A or CEI-830 to pigtail ends. This cable is for ARINC signals only
6 foot cable (with twisted pairs) transitions from the card end (P2) connector on the CEI-520/520A or CEI-830 to SCSI connectors . This cable is for ARINC signals only.
An 18" ribbon cable transitions from individual IP Module ribbon connectors on the ISA (PC/AT) carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel.
An 18" ribbon cable transitions from individual IP Module ribbon connectors on the PCI carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel.
A 15" ribbon cable transitions from individual IP modules on various carrier boards to a 37 pin D-sub female connector mounted on a PC expansion card end-panel. This allows external connection to pins 1-37 on an individual IP Module. The end-panel is easily removed from the D-sub connector. Also can be used for CEI-520/520A I/O discretes (P3).
A 30" ribbon cable transitions from individual IP modules on various carrier boards to a 37 pin D-sub female connector mounted on a PC expansion card end-panel. This allows external connection to pins 1-37 on an individual IP Module. The end-panel is easily removed from the D-sub connector. Also can be used for CEI-520/520A I/O discretes (P3).
Transitions from each card end (non-IRIG) connector on various boards into two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and two 8" cables with BNC cable jacks for I/O triggers.
Transitions from the PCCARD-1553 card edge connector into two 36" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers.
Transitions from the PCC-D1553 card edge connector into two 36" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers.
Transitions from the PCC-D1553 card edge connector into four 36" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers.
CONDOR ENGINEERING CONQPMC-1 Transitions from a SCSI-68 pin connector to two CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O.
CONDOR ENGINEERING CONQPMC-2 Transitions from a SCSI-68 pin connector to four CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O.
CONDOR ENGINEERING CONQPMC-4 Transitions from a SCSI-68 pin connector to eight CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O
An 18" cable assembly transitions from individual IP Module ribbon connectors on: VME and VXI front panels (or internal VME-AIC connectors) to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends.
An 18" cable assembly transitions from an IP-708 Module ribbon connector on the VXI-AIC to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends.